Voice modem MT5634 not recognised

[l***@duinheks.xs4all.nl]

Hallo,

I just installed an MT5634ZPX-PCI-U modem and found that vgetty refuses to
recognise it as voice modem. What am I doing wrong? I'm running kernel
2.6.15.4 and mgetty+sendfax 1.34.

Groetjes,

Hans.

jdh punt beekhuizen bij duinheks punt xs4all punt nl

=== import ===
03/09 10:47:18 yS2 detecting voice modem type
03/09 10:47:20 yS2 vgetty: Modem returned ERROR
03/09 10:47:21 yS2 no voice modem detected

03/09 10:47:21 yS2 vgetty: experimental test release 0.9.32 / with duplex
patch
03/09 10:47:21 yS2 mgetty: interim release 1.1.34-Nov30
03/09 10:47:21 yS2 reading generic configuration from config file
/usr/local/etc/mgetty+sendfax/voice.conf
03/09 10:47:21 yS2 reading program vgetty configuration from config file
/usr/local/etc/mgetty+sendfax/voice.conf
03/09 10:47:21 yS2 reading port ttyS2 configuration from config file
/usr/local/etc/mgetty+sendfax/voice.conf
03/09 10:47:21 yS2 check for lockfiles
03/09 10:47:21 yS2 locking the line
03/09 10:47:21 yS2 lowering DTR to reset Modem
03/09 10:47:22 yS2 send: AT&F[0d]
03/09 10:47:22 yS2 waiting for ``OK'' ** found **
03/09 10:47:22 yS2 send: ATE0L0M0S11=55+VCID=1[0d]
03/09 10:47:22 yS2 waiting for ``OK'' ** found **
03/09 10:47:22 yS2 send: AT[0d]
03/09 10:47:22 yS2 waiting for ``OK'' ** found **
03/09 10:47:22 yS2 mdm_send: 'ATI'
03/09 10:47:22 yS2 non-numeric ID string: 'LT V.92 1.0 MT5634ZPX-PCI-U
Internal Data/Fax/Voice Modem Version 1.32k'
03/09 10:47:22 yS2 Multitech MT5634ZBA-V92 detected
03/09 10:47:22 yS2 modem quirks: 0080
03/09 10:47:22 yS2 mdm_send: 'AT+FCLASS=2.0' -> OK
03/09 10:47:22 yS2 mdm_send: 'AT+FAA=1;+FCR=1' -> OK
03/09 10:47:22 yS2 mdm_send: 'AT+FBO=1' -> OK
03/09 10:47:22 yS2 mdm_send: 'AT+FNR=1,1,1,0' -> OK
03/09 10:47:22 yS2 mdm_send: 'AT+FLI="[phone]"' -> OK
03/09 10:47:22 yS2 mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> OK
03/09 10:47:22 yS2 detecting voice modem type
03/09 10:47:24 yS2 vgetty: Modem returned ERROR
03/09 10:47:25 yS2 no voice modem detected

03/09 10:47:25 yS2 vgetty: experimental test release 0.9.32 / with duplex
patch
03/09 10:47:25 yS2 mgetty: interim release 1.1.34-Nov30
03/09 10:47:25 yS2 reading generic configuration from config file
/usr/local/etc/mgetty+sendfax/voice.conf
03/09 10:47:25 yS2 reading program vgetty configuration from config file
/usr/local/etc/mgetty+sendfax/voice.conf
03/09 10:47:25 yS2 reading port ttyS2 configuration from config file
/usr/local/etc/mgetty+sendfax/voice.conf
03/09 10:47:25 yS2 check for lockfiles
03/09 10:47:25 yS2 locking the line
03/09 10:47:25 yS2 lowering DTR to reset Modem
03/09 10:47:26 yS2 send: AT&F[0d]
03/09 10:47:26 yS2 waiting for ``OK'' ** found **
03/09 10:47:26 yS2 send: ATE0L0M0S11=55+VCID=1[0d]
03/09 10:47:26 yS2 waiting for ``OK'' ** found **
03/09 10:47:26 yS2 send: AT[0d]
03/09 10:47:26 yS2 waiting for ``OK'' ** found **
03/09 10:47:26 yS2 mdm_send: 'ATI'
03/09 10:47:26 yS2 non-numeric ID string: 'LT V.92 1.0 MT5634ZPX-PCI-U
Internal Data/Fax/Voice Modem Version 1.32k'
03/09 10:47:26 yS2 Multitech MT5634ZBA-V92 detected
03/09 10:47:26 yS2 modem quirks: 0080
03/09 10:47:26 yS2 mdm_send: 'AT+FCLASS=2.0' -> OK
03/09 10:47:26 yS2 mdm_send: 'AT+FAA=1;+FCR=1' -> OK
03/09 10:47:26 yS2 mdm_send: 'AT+FBO=1' -> OK
03/09 10:47:26 yS2 mdm_send: 'AT+FNR=1,1,1,0' -> OK
03/09 10:47:26 yS2 mdm_send: 'AT+FLI="[phone]"' -> OK
03/09 10:47:26 yS2 mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> OK
03/09 10:47:26 yS2 detecting voice modem type
03/09 10:47:28 yS2 vgetty: Modem returned ERROR
03/09 10:47:29 yS2 no voice modem detected
=== tropmi ===

--- GoldED+/LNX 1.1.5/060219
* Origin: The Wizard is using MBSE/Linux (2:280/1018)

--
Posted automagically by a mail2news gateway at muc.de e.V.
Please direct questions, flames, donations, etc. to news-***@muc.de

[Gert Doering]

Hi,

Post by l***@duinheks.xs4all.nl
I just installed an MT5634ZPX-PCI-U modem and found that vgetty refuses to
recognise it as voice modem. What am I doing wrong? I'm running kernel
2.6.15.4 and mgetty+sendfax 1.34.

The log level is a bit low to see what's actually going on.

What is your modem returning in response to the ATI and ATI9 queries?

It should work if you just set "forcev253 true" in voice.conf

gert

[l***@duinheks.xs4all.nl]

Hallo Gert,

Post by l***@duinheks.xs4all.nl
I just installed an MT5634ZPX-PCI-U modem and found that vgetty
refuses to recognise it as voice modem.

GD> The log level is a bit low to see what's actually going on.

How high do you want it?

GD> What is your modem returning in response to the ATI and ATI9 queries?

That's:
ati
LT V.92 1.0 MT5634ZPX-PCI-U Internal Data/Fax/Voice Modem Version 1.32k
OK
ati9
52
OK

GD> It should work if you just set "forcev253 true" in voice.conf

It does, or at least it starts now without complaining.
But do you expect it to work without putting this in? And if yes, would you
like a log with a hugher log level?

Groetjes,

Hans.

jdh punt beekhuizen bij duinheks punt xs4all punt nl

--- GoldED+/LNX 1.1.5/060219
* Origin: The Wizard is using MBSE/Linux (2:280/1018)

--
Posted automagically by a mail2news gateway at muc.de e.V.
Please direct questions, flames, donations, etc. to news-***@muc.de

[tkvoice]

Gert:

Looks like Multitech came out with a newer firmware for this modem. In
the source tree mgetty-1.1.34/voice/libvoice/detect.c has:


{ati, "LT V.92 1.0 MT5634ZPX-PCI-U Internal Data/Fax/Voice Modem Version
1.32i", NULL, &V253modem},

We need to add a new line to detect.c to recogize the new firmware.

It looks like Multitech also released a new firmware v1.32k for my
model too: MT5634ZPX-PCI-V92

I will update my modem and send you the ATI line for inclusion in the
next patch.


Hans:

If you know how to compile vgetty. Just add a new line in detect.c
(below the above line is a nice place) that looks like this:


{ati, "LT V.92 1.0 MT5634ZPX-PCI-U Internal Data/Fax/Voice Modem Version
1.32k", NULL, &V253modem},

Then recompile and all will be detected automatically.

Thank you,

Peter
http://tkvoice.netfirms.com

Post by l***@duinheks.xs4all.nl
Hallo Gert,

Post by l***@duinheks.xs4all.nl
I just installed an MT5634ZPX-PCI-U modem and found that vgetty
refuses to recognise it as voice modem.

GD> The log level is a bit low to see what's actually going on.
How high do you want it?
GD> What is your modem returning in response to the ATI and ATI9 queries?
ati
LT V.92 1.0 MT5634ZPX-PCI-U Internal Data/Fax/Voice Modem Version 1.32k
OK
ati9
52
OK
GD> It should work if you just set "forcev253 true" in voice.conf
It does, or at least it starts now without complaining.
But do you expect it to work without putting this in? And if yes, would you
like a log with a hugher log level?
Groetjes,
Hans.
jdh punt beekhuizen bij duinheks punt xs4all punt nl
--- GoldED+/LNX 1.1.5/060219
* Origin: The Wizard is using MBSE/Linux (2:280/1018)
--
Posted automagically by a mail2news gateway at muc.de e.V.

[Gert Doering]

Hi,

Post by tkvoice
Looks like Multitech came out with a newer firmware for this modem. In
{ati, "LT V.92 1.0 MT5634ZPX-PCI-U Internal Data/Fax/Voice Modem Version
1.32i", NULL, &V253modem},

... I'd really wish they would just send a short and easy-to-match code
back...

Post by tkvoice
I will update my modem and send you the ATI line for inclusion in the
next patch.

Please :-)

gert

[tkvoice]

Gert here is the patch for Multitech ZPX PCI firmware 1.32k

Peter

[l***@duinheks.xs4all.nl]

Hallo,

Op 31 Mar 06 schreef tkvoice aan ***@duinheks.xs4all.nl:

tk> Hans:
tk> If you know how to compile vgetty. Just add a new line in
tk> detect.c (below the above line is a nice place) that looks like this:
tk> {ati, "LT V.92 1.0 MT5634ZPX-PCI-U Internal Data/Fax/Voice Modem Version
tk> 1.32k", NULL, &V253modem},
tk> Then recompile and all will be detected automatically.

Sorry, I did not see this message before :(
I put the line into detect.c, recompiled, changed voice.conf back to forceV253
False and restarted vgetty.
It initialises without complaining now.
Thank you very much!

Groetjes,

Hans.

jdh punt beekhuizen bij duinheks punt xs4all punt nl

--- GoldED+/LNX 1.1.5/060315
* Origin: The Wizard is using MBSE/Linux (2:280/1018)

--
Posted automagically by a mail2news gateway at muc.de e.V.
Please direct questions, flames, donations, etc. to news-***@muc.de