mgetty not receiving - Problem NOT Solved

Cyril Spiro, MD, MBA

2008-06-06 02:43:16 UTC

This is a multi-part message in MIME format.

------=_NextPart_000_0152_01C8C75D.8BD66A30
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

=20

Due to an unknown cause, the mgetty stopped receiving faxes properly =
again.
A telephony expert on site confirmed that once the fax is being received =
by
mgetty, no signal is being sent to the sending fax to indicate that the =
call
is properly completed. The logs are shown below.

=20

Any help would be greatly appreciated.=20

=20

-----Original Message-----
From: Cyril Spiro, MD, MBA [mailto:***@mdwebsolutions.net]=20
Sent: Thursday, June 05, 2008 10:13 AM
To: '***@muc.de'
Subject: RE: mgetty not receiving - Problem Solved

=20

Please disregard the last message. It turned out to be a loop error in =
the
telephony wiring.

=20

=20

-----Original Message-----
From: Cyril Spiro, MD, MBA [mailto:***@mdwebsolutions.net]=20
Sent: Thursday, June 05, 2008 8:57 AM
To: '***@muc.de'
Subject: mgetty not receiving

=20

Thanks in advance for help with this issue.

=20

We have a MultiTech Systems Model number: MT56342BA external modem =
attached
to a Dell server running Red Hat Enterprise Linux 5. Sendfax is working
perfectly. However, whenever it attempts to receive a fax it fails to
create a .g3 file. We have a similar setup with this type of modem on =
RHEL4
at a different site which is receiving faxes properly. We have had this
modem (this piece of hardware) on a different server (RHEL4 O/S) and it =
was
receiving faxes properly. Also, as a test we attached a regular fax =
machine
to the phone line that is going into the modem and it received a fax
properly. Lastly, when using our own fax machine to send a fax to the =
Dell
server, the fax signal was initially answered but then failed and a line
error message was printed by the sending fax machine. So, we believe =
that
the problem is in our mgetty settings but can't figure out where.

=20

The output from the log set at debug 5 is:

06/04 22:37:16 yS0 checking lockfiles, locking the line

06/04 22:37:16 yS0 makelock(ttyS0) called

06/04 22:37:16 yS0 do_makelock: lock=3D'/var/lock/LCK..ttyS0'

06/04 22:37:16 yS0 lock made

06/04 22:37:16 yS0 wfr: waiting for ``RING''

06/04 22:37:16 yS0 got: [0a][0d][0a]RING[0d]

06/04 22:37:16 yS0 wfr: rc=3D0, drn=3D0

06/04 22:37:16 yS0 send: ATA[0d]

06/04 22:37:16 yS0 waiting for ``CONNECT''

06/04 22:37:16 yS0 got: ATA[0d][0d][0a]+FCO[0d]

06/04 22:37:28 yS0 found action string: ``+FCO_''

06/04 22:37:28 yS0 start fax receiver...

06/04 22:37:28 yS0 fax receiver: entry

06/04 22:37:28 yS0 fax_wait_for(OK)

06/04 22:37:28 yS0 fax_wait_for: string '+FTI:" 18069933330"'

06/04 22:37:28 yS0 fax_id: '+FTI:" 18069933330"'

06/04 22:37:28 yS0 fax_wait_for: string '+FCS:1,5,0,2,0,0,0,0'

06/04 22:37:28 yS0 transmission par.: '+FCS:1,5,0,2,0,0,0,0'

06/04 22:37:28 yS0 fax_wait_for: string 'OK'** found **

06/04 22:37:28 yS0 utmp + wtmp entry made

06/04 22:37:28 yS0 tio_set_flow_control( HARD XON_IN )

06/04 22:37:28 yS0 mdm_send: 'AT+FLO=3D2'

06/04 22:37:28 yS0 mdm_command: string 'AT+FLO=3D2'

06/04 22:37:28 yS0 mdm_command: string 'OK' -> OK

06/04 22:37:28 yS0 430855 Mb free on =
/home/heinigdoc/public_html/pdfs/fax

06/04 22:37:29 yS0 fax_send: 'AT+FDR'

06/04 22:37:29 yS0 fax_wait_for(CONNECT)

06/04 22:37:29 yS0 fax_wait_for: string 'AT+FDR'

06/04 22:37:41 yS0 fax_wait_for: string '+FHS:E0'

06/04 22:37:41 yS0 connection hangup: '+FHS:E0'

06/04 22:37:41 yS0 (Unexpected hangup / read() error / write() error
(int.))** found **

06/04 22:37:41 yS0 fax_get_pages: cannot start page receive

06/04 22:37:41 yS0 fax receiver: hangup & end

06/04 22:37:41 yS0 fax_notify_mail: sending mail to: faxadmin

06/04 22:37:41 yS0 notify: '/etc/mgetty+sendfax/new_fax -5 =
'18069933330' 0

/dev/console 2>&1 </dev/null'

06/04 22:37:41 yS0 setenv: 'CALLER_ID=3Dnone'

06/04 22:37:41 yS0 setenv: 'CONNECT=3D'

06/04 22:37:41 yS0 setenv: 'DEVICE=3DttyS0'

06/04 22:37:41 ##### fax dev=3DttyS0, pid=3D3488, caller=3D'none', =
name=3D'',
id=3D'18069933330', +FHNG=3D-05, pages=3D0/0, time=3D00:00:25

=20

=20

06/04 22:37:41 yS0 system() failed: No such file or directory

06/04 22:37:43 yS0 mdm_send: 'ATH0'

06/04 22:37:43 yS0 mdm_command: string 'OK' -> OK

06/04 22:37:43 yS0 removing lock file

--

06/04 22:37:43 yS0 mgetty: interim release 1.1.33-Apr10

06/04 22:37:43 yS0 check for lockfiles

06/04 22:37:43 yS0 checklock: stat failed, no file

06/04 22:37:43 yS0 locking the line

06/04 22:37:43 yS0 makelock(ttyS0) called

06/04 22:37:43 yS0 do_makelock: lock=3D'/var/lock/LCK..ttyS0'

06/04 22:37:43 yS0 lock made

06/04 22:37:43 yS0 tio_get_rs232_lines: status: RTS CTS DSR DTR

06/04 22:37:43 yS0 lowering DTR to reset Modem

06/04 22:37:44 yS0 tss: set speed to 38400 (017)

06/04 22:37:44 yS0 tio_set_flow_control( HARD )

06/04 22:37:44 yS0 waiting for line to clear (VTIME=3D1), read:
ATH0[0d][0d][0a]OK[0d][0a]OK[0d][0a]ATS0=3D0Q0&D3&C1[0d][0d][0a]OK[0d][0a=
]ATI[
0d][0d][0a]LT V.92 1.0 MT5634ZBA-V92 Serial Data/Fax Modem Version
3.32d[0d][0a][0d][0a]OK[0d][0a]AT+FCLASS=3D2.0[0d][0d][0a]OK[0d][0a]AT+FA=
A=3D1;+
FCR=3D1[0d][0d][0a]OK[0d][0a]AT+FBO=3D1[0d][0d][0a]OK[0d][0a]AT+FNR=3D1,1=
,1,0[0d][
0d][0a]OK[0d][0a]AT+FLI=3D"8139091005"[0d][0d][0a]OK[0d][0a]AT+FCC=3D1,5,=
0,2,0,0
,0,0[0d][0d][0a]OK[0d][0a][0d][0a]RING[0d][0a]ATA[0d][0d][0a]+FCO[0d][0a]=
[0d
][0a]+FTI:"
18069933330"[0d][0a][0d][0a]+FCS:1,5,0,2,0,0,0,0[0d][0a][0d][0a]OK[0d][0a=
]AT
+FLO=3D2[0d][0d][0a]OK[0d][0a]AT+FDR[0d][0d][0a]+FHS:E0[0d][0a]=3D"813909=
1005"[0
d][0d][0a]OK[0d][0a]AT+FCC=3D1,5,0,2,0,0,0,0[0d][0d][0a]OK[0d][0a]AT+FBO=3D=
0[0d]
[0d][0a]OK[0d][0a]AT+FNR=3D1,1,1,0[0d][0d][0a]OK[0d][0a]AT+FLO=3D2[0d][0d=
][0a]OK
[0d][0a]AT&K4[0d][0d][0a]OK[0d][0a]ATD9863330[0d][0d][0a]+FCO[0d][0a][0d]=
[0a
]+FCI:" =20

06/04 22:37:44 yS0 clean_line: only 500 of 2048 bytes logged

06/04 22:37:44 yS0 send: \dATQ0V1H0[0d]

06/04 22:37:45 yS0 waiting for ``OK''

06/04 22:37:45 yS0 got: ATQ0V1H0[0d][0d][0a]OK ** found **

06/04 22:37:45 yS0 send: ATS0=3D0Q0&D3&C1[0d]

06/04 22:37:45 yS0 waiting for ``OK''

06/04 22:37:45 yS0 got: [0d][0a]ATS0=3D0Q0&D3&C1[0d][0d][0a]OK ** =
found **

06/04 22:37:45 yS0 mdm_send: 'ATI'

06/04 22:37:45 yS0 mdm_gis: string 1: 'LT V.92 1.0 MT5634ZBA-V92 =
Serial
Data/Fax Modem Version 3.32d'

06/04 22:37:45 yS0 mdm_identify: string 'LT V.92 1.0 MT5634ZBA-V92 =
Serial
Data/Fax Modem Version 3.32d'

06/04 22:37:45 yS0 non-numeric ID string: 'LT V.92 1.0 MT5634ZBA-V92 =
Serial
Data/Fax Modem Version 3.32d'

06/04 22:37:45 yS0 Multitech MT5634ZBA-V92 detected

06/04 22:37:45 yS0 modem quirks: 0080

06/04 22:37:45 yS0 mdm_send: 'AT+FCLASS=3D2.0'

06/04 22:37:45 yS0 mdm_command: string 'AT+FCLASS=3D2.0'

06/04 22:37:45 yS0 mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 mdm_send: 'AT+FAA=3D1;+FCR=3D1'

06/04 22:37:45 yS0 mdm_command: string 'AT+FAA=3D1;+FCR=3D1'

06/04 22:37:45 yS0 mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 mdm_send: 'AT+FBO=3D1'

06/04 22:37:45 yS0 mdm_command: string 'AT+FBO=3D1'

06/04 22:37:45 yS0 mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 mdm_send: 'AT+FNR=3D1,1,1,0'

06/04 22:37:45 yS0 mdm_command: string 'AT+FNR=3D1,1,1,0'

06/04 22:37:45 yS0 mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 mdm_send: 'AT+FLI=3D"8139091005"'

06/04 22:37:45 yS0 mdm_command: string 'AT+FLI=3D"8139091005"'

06/04 22:37:45 yS0 mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 mdm_send: 'AT+FCC=3D1,5,0,2,0,0,0,0'

06/04 22:37:45 yS0 mdm_command: string 'AT+FCC=3D1,5,0,2,0,0,0,0'

06/04 22:37:45 yS0 mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 waiting for line to clear (VTIME=3D3), read:=20

06/04 22:37:46 yS0 removing lock file

06/04 22:37:46 yS0 waiting...[***@drheinig log]#

=20

The mgetty.config file is set as follows:

#

# mgetty configuration file

#

# this is a sample configuration file, see mgetty.info for details

#

# comment lines start with a "#", empty lines are ignored

=20

=20

# ----- global section -----

#

# In this section, you put the global defaults, per-port stuff is below

=20

=20

# set the global debug level to "4" (default from policy.h)

debug 5

=20

# set the local fax station id

fax-id 8139091005

=20

# access the modem(s) with 38400 bps

speed 38400

=20

# use these options to make the /dev/tty-device owned by "uucp.uucp"=20

# and mode "rw-rw-r--" (0664). *LEADING ZERO NEEDED!*

#port-owner uucp

#port-group uucp

#port-mode 0664

=20

# use these options to make incoming faxes owned by "root.uucp"=20

# and mode "rw-r-----" (0640). *LEADING ZERO NEEDED!*

fax-owner root

fax-group uucp

fax-mode 0755

fax-spool-in /home/heinigdoc/public_html/pdfs/fax

=20

# ----- port specific section -----

#=20

# Here you can put things that are valid only for one line, not the =
others

#

=20

# Zoom V.FX 28.8, connected to ttyS0: don't do fax, less logging

#

#port ttyS0

# debug 3

# data-only y

=20

# some other Rockwell modem, needs "switchbd 19200" to receive faxes

# properly (otherwise it will fail with "timeout").

#

#port ttyS1

# speed 38400

# switchbd 19200

=20

# ZyXEL 2864, connected to ttyS2: maximum debugging, grab statistics

#

#port ttyS2

# debug 8

# init-chat "" \d\d\d+++\d\d\dAT&FS2=3D255 OK ATN3S0=3D0S13.2=3D1 OK=20

# statistics-chat "" AT OK ATI2 OK

# statistics-file /var/log/statistics.ttyS2

# modem-type cls2

=20

# direct connection of a VT100 terminal which doesn't like DTR drops

# ("direct" meaning "*no* *modem*". NEVER enable "direct yes" on modem
lines!)

#

#port ttyS3

# direct y

# speed 19200

# toggle-dtr n

=20

Permissions to the directories /pdfs and /fax is set to 0777 to avoid =
the
possibility that the error is due to a permission problem.

=20

Please let me know you thoughts on this problem. It would be most
appreciated.

=20

Thank you,

spiroc

=20

------=_NextPart_000_0152_01C8C75D.8BD66A30
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

<html>

<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">

<meta name=3DGenerator content=3D"Microsoft Word 10 (filtered)">

<style>

</style>

</head>

<body lang=3DEN-US link=3Dblue vlink=3Dpurple>

<div class=3DSection1>

 

<div>

Due to an unknown cause, the =
mgetty stopped
receiving faxes properly again.  A telephony expert on site =
confirmed that
once the fax is being received by mgetty, no signal is being sent to the
sending fax to indicate that the call is properly completed.  The =
logs are
shown below.

 

Any help would be greatly =
appreciated. 

 

</div>

-----Original =
Message----- 
From: Cyril =
Spiro, MD,
MBA [mailto:***@mdwebsolutions.net] 
Sent: Thursday, June
05, 2008 10:13 =
AM 
To: '***@muc.de=
' 
Subject: RE: mgetty not =
receiving
- Problem Solved

 

Please disregard =
the last
message.  It turned out to be a loop error in the telephony =
wiring.

 </fo=
nt>

<div>

 

</div>

-----Original =
Message----- 
From: Cyril Spiro, MD, =
MBA
[mailto:***@mdwebsolutions.net] 
Sent: Thursday, June
05, 2008 8:57 =
AM 
To: '***@muc.de' 
Subject: mgetty not =
receiving

 

Thanks in advance for help =
with this
issue.

 

We have a MultiTech Systems =
Model
number: MT56342BA external modem attached to a Dell server running Red =
Hat
Enterprise Linux 5.  Sendfax is working perfectly.  However, =
whenever
it attempts to receive a fax it fails to create a .g3 file.  We =
have a
similar setup with this type of modem on RHEL4 at a different site which =
is
receiving faxes properly.  We have had this modem (this piece of =
hardware)
on a different server (RHEL4 O/S) and it was receiving faxes =
properly. 
Also, as a test we attached a regular fax machine to the phone line that =
is
going into the modem and it received a fax properly.  Lastly, when =
using
our own fax machine to send a fax to the Dell server, the fax signal was =
initially
answered but then failed and a line error message was printed by the =
sending
fax machine.  So, we believe that the problem is in our mgetty =
settings
but can’t figure out where.

 

The output from the log set =
at debug
5 is:

06/04 22:37:16 =
yS0   checking
lockfiles, locking the line

06/04 22:37:16 =
yS0  
makelock(ttyS0) called

06/04 22:37:16
yS0   do_makelock: =
lock=3D'/var/lock/LCK..ttyS0'

06/04 22:37:16 =
yS0   lock
made

06/04 22:37:16 yS0 
wfr: waiting for ``RING''

06/04 22:37:16
yS0   got: [0a][0d][0a]RING[0d]

06/04 22:37:16
yS0   wfr: rc=3D0, drn=3D0

06/04 22:37:16 yS0  =
send:
ATA[0d]

06/04 22:37:16 yS0 
waiting for ``CONNECT''

06/04 22:37:16 =
yS0   got:
ATA[0d][0d][0a]+FCO[0d]

06/04 22:37:28 yS0 
found action string: ``+FCO_''

06/04 22:37:28 yS0  =
start fax
receiver...

06/04 22:37:28 =
yS0   fax
receiver: entry

06/04 22:37:28 yS0 
fax_wait_for(OK)

06/04 22:37:28
yS0   fax_wait_for: string
'+FTI:"         =
18069933330"'

06/04 22:37:28 yS0 
fax_id: '+FTI:"        
18069933330"'

06/04 22:37:28
yS0   fax_wait_for: string =
'+FCS:1,5,0,2,0,0,0,0'

06/04 22:37:28 yS0 
transmission par.: '+FCS:1,5,0,2,0,0,0,0'

06/04 22:37:28 =
yS0  
fax_wait_for: string 'OK'** found **

06/04 22:37:28 =
yS0   utmp
+ wtmp entry made

06/04 22:37:28 =
yS0  
tio_set_flow_control( HARD XON_IN )

06/04 22:37:28 yS0 
mdm_send: 'AT+FLO=3D2'

06/04 22:37:28
yS0   mdm_command: string 'AT+FLO=3D2'

06/04 22:37:28 =
yS0  
mdm_command: string 'OK' -> OK

06/04 22:37:28 =
yS0  
430855 Mb free on /home/heinigdoc/public_html/pdfs/fax

06/04 22:37:29 yS0 
fax_send: 'AT+FDR'

06/04 22:37:29 yS0 
fax_wait_for(CONNECT)

06/04 22:37:29
yS0   fax_wait_for: string 'AT+FDR'

06/04 22:37:41
yS0   fax_wait_for: string '+FHS:E0'

06/04 22:37:41 yS0 
connection hangup: '+FHS:E0'

06/04 22:37:41
yS0   (Unexpected hangup / read() error / write() error =
(int.))**
found **

06/04 22:37:41 yS0 
fax_get_pages: cannot start page receive

06/04 22:37:41 =
yS0   fax
receiver: hangup & end

06/04 22:37:41 =
yS0  
fax_notify_mail: sending mail to: faxadmin

06/04 22:37:41
yS0   notify: '/etc/mgetty+sendfax/new_fax -5 '18069933330' =
0 
>/dev/console 2>&1 </dev/null'

06/04 22:37:41
yS0   setenv: 'CALLER_ID=3Dnone'

06/04 22:37:41
yS0   setenv: 'CONNECT=3D'

06/04 22:37:41
yS0   setenv: 'DEVICE=3DttyS0'

06/04 22:37:41 ##### fax
dev=3DttyS0, pid=3D3488, caller=3D'none', name=3D'', id=3D'18069933330', =
+FHNG=3D-05,
pages=3D0/0, time=3D00:00:25

 

 

06/04 22:37:41 yS0 
system() failed: No such file or directory

06/04 22:37:43 yS0 
mdm_send: 'ATH0'

06/04 22:37:43 =
yS0  
mdm_command: string 'OK' -> OK

06/04 22:37:43 =
yS0  
removing lock file

--

06/04 22:37:43 yS0 
mgetty: interim release 1.1.33-Apr10

06/04 22:37:43 yS0  =
check for
lockfiles

06/04 22:37:43 =
yS0  
checklock: stat failed, no file

06/04 22:37:43 yS0 
locking the line

06/04 22:37:43 =
yS0  
makelock(ttyS0) called

06/04 22:37:43
yS0   do_makelock: =
lock=3D'/var/lock/LCK..ttyS0'

06/04 22:37:43 =
yS0   lock
made

06/04 22:37:43
yS0   tio_get_rs232_lines: status: RTS CTS DSR =
DTR

06/04 22:37:43 yS0 
lowering DTR to reset Modem

06/04 22:37:44 =
yS0   tss:
set speed to 38400 (017)

06/04 22:37:44
yS0   tio_set_flow_control( HARD )

06/04 22:37:44 =
yS0  
waiting for line to clear (VTIME=3D1), read:
ATH0[0d][0d][0a]OK[0d][0a]OK[0d][0a]ATS0=3D0Q0&D3&C1[0d][0d][0a]O=
K[0d][0a]ATI[0d][0d][0a]LT
V.92 1.0 MT5634ZBA-V92 Serial Data/Fax Modem Version
3.32d[0d][0a][0d][0a]OK[0d][0a]AT+FCLASS=3D2.0[0d][0d][0a]OK[0d][0a]AT+FA=
A=3D1;+FCR=3D1[0d][0d][0a]OK[0d][0a]AT+FBO=3D1[0d][0d][0a]OK[0d][0a]AT+FN=
R=3D1,1,1,0[0d][0d][0a]OK[0d][0a]AT+FLI=3D"8139091005"[0d][0d][=
0a]OK[0d][0a]AT+FCC=3D1,5,0,2,0,0,0,0[0d][0d][0a]OK[0d][0a][0d][0a]RING[0=
d][0a]ATA[0d][0d][0a]+FCO[0d][0a][0d][0a]+FTI:"   &nb=
sp;    
18069933330"[0d][0a][0d][0a]+FCS:1,5,0,2,0,0,0,0[0d][0a][0d][0a]OK[0=
d][0a]AT+FLO=3D2[0d][0d][0a]OK[0d][0a]AT+FDR[0d][0d][0a]+FHS:E0[0d][0a]=3D=
"8139091005"[0d][0d][0a]OK[0d][0a]AT+FCC=3D1,5,0,2,0,0,0,0[0d][=
0d][0a]OK[0d][0a]AT+FBO=3D0[0d][0d][0a]OK[0d][0a]AT+FNR=3D1,1,1,0[0d][0d]=
[0a]OK[0d][0a]AT+FLO=3D2[0d][0d][0a]OK[0d][0a]AT&K4[0d][0d][0a]OK[0d]=
[0a]ATD9863330[0d][0d][0a]+FCO[0d][0a][0d][0a]+FCI:" 


06/04 22:37:44 yS0  =
clean_line:
only 500 of 2048 bytes logged

06/04 22:37:44 yS0  =
send:
\dATQ0V1H0[0d]

06/04 22:37:45 yS0 
waiting for ``OK''

06/04 22:37:45
yS0   got: ATQ0V1H0[0d][0d][0a]OK ** found =
**

06/04 22:37:45 yS0 
send: ATS0=3D0Q0&D3&C1[0d]

06/04 22:37:45 yS0 
waiting for ``OK''

06/04 22:37:45 =
yS0   got:
[0d][0a]ATS0=3D0Q0&D3&C1[0d][0d][0a]OK ** found =
**

06/04 22:37:45 yS0 
mdm_send: 'ATI'

06/04 22:37:45 =
yS0  
mdm_gis: string 1: 'LT V.92 1.0 MT5634ZBA-V92 Serial Data/Fax Modem =
Version
3.32d'

06/04 22:37:45 =
yS0  
mdm_identify: string 'LT V.92 1.0 MT5634ZBA-V92 Serial Data/Fax Modem =
Version
3.32d'

06/04 22:37:45 yS0 
non-numeric ID string: 'LT V.92 1.0 MT5634ZBA-V92 Serial Data/Fax Modem =
Version
3.32d'

06/04 22:37:45 yS0  =
Multitech
MT5634ZBA-V92 detected

06/04 22:37:45 yS0  =
modem
quirks: 0080

06/04 22:37:45 yS0 
mdm_send: 'AT+FCLASS=3D2.0'

06/04 22:37:45
yS0   mdm_command: string 'AT+FCLASS=3D2.0'

06/04 22:37:45 =
yS0  
mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 
mdm_send: 'AT+FAA=3D1;+FCR=3D1'

06/04 22:37:45
yS0   mdm_command: string =
'AT+FAA=3D1;+FCR=3D1'

06/04 22:37:45 =
yS0  
mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 
mdm_send: 'AT+FBO=3D1'

06/04 22:37:45
yS0   mdm_command: string 'AT+FBO=3D1'

06/04 22:37:45 =
yS0  
mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 
mdm_send: 'AT+FNR=3D1,1,1,0'

06/04 22:37:45
yS0   mdm_command: string 'AT+FNR=3D1,1,1,0'

06/04 22:37:45 =
yS0  
mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 
mdm_send: 'AT+FLI=3D"8139091005"'

06/04 22:37:45
yS0   mdm_command: string =
'AT+FLI=3D"8139091005"'

06/04 22:37:45 =
yS0  
mdm_command: string 'OK' -> OK

06/04 22:37:45 yS0 
mdm_send: 'AT+FCC=3D1,5,0,2,0,0,0,0'

06/04 22:37:45
yS0   mdm_command: string =
'AT+FCC=3D1,5,0,2,0,0,0,0'

06/04 22:37:45 =
yS0  
mdm_command: string 'OK' -> OK

06/04 22:37:45
yS0   waiting for line to clear (VTIME=3D3), read: =


06/04 22:37:46 =
yS0  
removing lock file

06/04 22:37:46 yS0 
waiting...[***@drheinig log]#

 

The mgetty.config file is =
set as
follows:

#

# mgetty
configuration file

#

# this =
is a sample
configuration file, see mgetty.info for details

#

# =
comment lines
start with a "#", empty lines are ignored

 

 

# ----- =
global
section -----

#

# In =
this section,
you put the global defaults, per-port stuff is below

 

 

# set =
the global
debug level to "4" (default from policy.h)

debug =
5

 

# set =
the local fax
station id

fax-id =
8139091005

 

# access =
the
modem(s) with 38400 bps

speed =
38400

 

#  =
use these
options to make the /dev/tty-device owned by "uucp.uucp" =


#  =
and mode
"rw-rw-r--" (0664). *LEADING ZERO NEEDED!*

#port-owner =
uucp

#port-group =
uucp

#port-mode =
0664

 

#  =
use these
options to make incoming faxes owned by "root.uucp" =


#  =
and mode
"rw-r-----" (0640). *LEADING ZERO NEEDED!*

fax-owner =
root

fax-group =
uucp

fax-mode =
0755

fax-spool-in
/home/heinigdoc/public_html/pdfs/fax

 

# ----- =
port
specific section -----

# =


# Here =
you can put
things that are valid only for one line, not the =
others

#

 

# Zoom =
V.FX 28.8,
connected to ttyS0: don't do fax, less logging

#

#port =
ttyS0

#  =
debug 3

#  =
data-only y

 

# some =
other
Rockwell modem, needs "switchbd 19200" to receive =
faxes

# =
properly
(otherwise it will fail with "timeout").

#

#port =
ttyS1

#  =
speed 38400

#  =
switchbd
19200

 

# ZyXEL =
2864,
connected to ttyS2: maximum debugging, grab statistics

#

#port =
ttyS2

#  =
debug 8

#  =
init-chat
"" \d\d\d+++\d\d\dAT&FS2=3D255 OK ATN3S0=3D0S13.2=3D1 OK =


# 
statistics-chat "" AT OK ATI2 OK

# 
statistics-file /var/log/statistics.ttyS2

#  =
modem-type
cls2

 

# direct =
connection
of a VT100 terminal which doesn't like DTR drops

#
("direct" meaning "*no* *modem*".  NEVER enable
"direct yes" on modem lines!)

#

#port =
ttyS3

#  =
direct y

#  =
speed 19200

#  =
toggle-dtr
n

 

Permissions to the =
directories /pdfs
and /fax is set to 0777 to avoid the possibility that the error is due =
to a
permission problem.

 

Please let me know you =
thoughts on
this problem.  It would be most appreciated.

 

Thank =
you,

spiroc

 

</div>

</body>

</html>

------=_NextPart_000_0152_01C8C75D.8BD66A30--